Click image to view full size image
Spitstar is a high efficiency expansive mortar to demolish and cut rocks and concretes. It swells when poured into a hole and develops a pressure higher than 80MP(800kg/cm2) on the hole walls after mixed with clean and cold water, thereby breaking them open. Splitstar is environmentally friendly because it releases no toxic fumes or harmful substances of any kind. So it is called a Highly Soundless Cracking Agent(HSCA). It is non-explosive; Therefore supervision of trained personnel is not essential.
WHAT IS EXPANSIVE MORTAR USED FOR?
1. Quarrying marble and granite, limestone, sand stone; Cracking nature ground
2. Breaking rock into pieces; Deposition of falling rocks
3. Demolishing concrete structure, Chipping defective concrete piles, etc
4. In the field as a new method of demolition, EXPANSIVE MORTAR can effectively be use in the conruction and civil engineering fields
Advantages:
Controlled Demolition
Dust free
Vibration Free
No license required
No flying debris
No toxic fumes
Environmental friendly
Silent Operation
Rapid usability
Ecomomy
Safety for vicinity
CONSUMPTIONS
WHAT IS EXPANSIVE MORTAR USED FOR?
1. Quarrying marble and granite, limestone, sand stone; Cracking nature ground
2. Breaking rock into pieces; Deposition of falling rocks
3. Demolishing concrete structure, Chipping defective concrete piles, etc
4. In the field as a new method of demolition, EXPANSIVE MORTAR can effectively be use in the conruction and civil engineering fields
Advantages:
Controlled Demolition
Dust free
Vibration Free
No license required
No flying debris
No toxic fumes
Environmental friendly
Silent Operation
Rapid usability
Ecomomy
Safety for vicinity
| Type of SPLIT AG | Usable temperature |
| SCA-1 | 25°C-40°C |
| SCA-2 | 10°C-25°C |
| SCA-3 | -5°C-10°C |
| Hole diameter(mm) | 30 32 34 36 38 40 42 44 46 48 50 |
| Consumption(kg/m³) | 1.2 1.3 1.5 1.7 .1.9 2.1 2.3 2.5 2.8 3.0 3.2 |
| Hole depth | 1 |